RPN scripts for mapping some of the Aerosoft CRJ series cockpit buttons (LVAR events) to buttons on your yoke/throttle/external device. I'm using some of these scripts with my Bravo throttle and CH yoke. Some are made on request.
You need Lorby's Axis And Ohs payware or a similar program to make this scripts work.
Some of the scripts have animation commands. Buttons/switches will move and you will have sounds in the cockpit when activated.
How to use:
1. Import the scripts in to AAO.
2. Assign the functions function to your device as you like.
Ver. 1.6 Following changes and additions:
- - Corrected values sent by rotary knobs (incr/decr)
- - 12_Bank_Toggle
- - FD_LS_Toggle
- - FD_RS_Toggle
- - Landing_Alt_Decr
- - Landing_Alt_Incr
- - Wiper_Step_Right
- - Wiper_Step_Left
Ver 1.5 Added following scripts:
- - NW_Steer_Axis (Script for using an axis for Nosewheel tiller steering - NW STRG will only work when NW STRG switch is Armed)
- - NW_STRG_ARMED
- - NW_STRG_OFF
- - VNAV_Select
Ver 1.4 Added following scripts:
- - Baro_Decr_LSP
- - Baro_Hpa_In_LSP (HPA/IN toggle)
- - Baro_Incr_LSP
- - Baro_STD_LSP (Setting pressure to STD on LSP)
- - DH_MDA_Alt_Decr_LSP
- - DH_MDA_Alt_Incr_LSP
- - DH_MDA_Set_LSP
- - DH_Sel_LSP
- - MDA_Sel_LSP
- - Stby_Inst_Press_Decrease
- - Stby_Inst_Press_Increase
- - Stby_Inst_Press_Std
Ver 1.3 added following scripts:
- - AP_Disc_Yoke_LS (Cpt side)
- - Brg1_LSP (Cpt side)
- - Brg2_LSP (Cpt side)
- - Elev_Trim_Down (With button animation)
- - Elev_Trim_Up (With button animation)
- - MFD_modes_Decr_LSP (Cpt side)
- - MFD_modes_Decr_RSP (FO side)
- - MFD_modes_Incr_LSP (Cpt side)
- - MFD_modes_Incr_RSP (FO side)
- - Nav_Source_Decr_LSP (Cpt side)
- - Nav_Source_Incr_LSP (Cpt side)
- - Range_Zoom_Decr_LSP (Cpt side)
- - Range_Zoom_Decr_RSP (FO side)
- - Range_Zoom_Incr_LSP (Cpt side)
- - Range_Zoom_Incr_RSP (FO side)
- - Rudder_Trim_Left (With button animation)
- - Rudder_Trim_Right (With button animation)
- - VS_Decrase (With button animation)
- - VS_Increase (With button animation)
The following scripts are used as events on the Bravo throttle axis/reverse handle
- - Thr_Rev1_cut (Bravo button 9 Key Up Event)
- - Thr_Rev1_deploy (Bravo button 9 Key Down Event)
- - Thr_Rev2_cut (Bravo button 10 Key Up Event)
- - Thr_Rev2_deploy (Bravo button 10 Key Down Event)
- - Thr1_Cutoff (Bravo button 25 Key Down Event)
- - Thr1_Idle (Bravo button 25 Key Up Event)
- - Thr2_Cutoff (Bravo button 26 Key Down Event)
- - Thr2_Idle (Bravo button 26 Key Up Event)
Ver 1.2 including following scripts:
- - Alt_Hold_Mode_Select
- - Altitude_Dec
- - Altitude_Inc
- - AP_select
- - Appr_Mode_Select
- - Back_Course_Hold_Select
- - Beacon_Light_Off
- - Beacon_Light_On
- - Course_Decr (CRS 1)
- - Course_Incr (CRS 1)
- - Course2_Decr
- - Course2_Incr
- - Flaps_AxisMin0Max700 (Script for using an axis for flaps asignment - set Min value=0 and Max Value=700)
- - Heading_Bug_Sync
- - Heading_Decr
- - Heading_Incr
- - Heading_Mode_Select
- - HUD_Down
- - HUD_Up
- - Ldg_Lights_Off (turns OFF all 3 landing light switces at once)
- - Ldg_Lights_On (turns ON all 3 landing light switces at once)
- - Logo_Light_Off
- - Logo_Light_On
- - Master_Battery_Off
- - Master_Battery_On
- - Nav_Light_On
- - Nav_Lights_Off
- - Nav_Mode_Select
- - Range_Zoom_Decr_Cpt
- - Range_Zoom_Decr_SecOff
- - Range_Zoom_Incr_Cpt
- - Range_Zoom_Incr_SecOff
- - Speed_Decr
- - Speed_Incr
- - Speed_Mode_Select
- - Strobe_Light_Off
- - Strobe_Light_On
- - Taxi_Light_Off
- - Taxi_Light_On
- - TOGA_engage
- - Vert_Speed_Mode_Select
- - Wing_Insp_Lights_Off
- - Wing_Insp_Lights_On
A big thanks to all simmers out there sharing and supporting making this collection possible.
Enjoy
Hi, I notice the Variable names are not at all the same as the list you have up on here. I had a hard time figuring out that you first select one thing to switch to FMS Altitude mode, then increment/decrement.
I am trying to figure out why if I have Repeat on and click once, the altitude or speed (or whatever) goes up twice but only does that when Repeat is checked. How can I fix that?
1 years ago
DragonLick
Thank you for your effort. Perfect!!!
2 years ago
Fotis12
I use Axis and Ohs to opearate the CRJ panels, including FCP knobs for selecting course, speed, heading, etc.
Following RPN script used to work correctly for heading selection (example) - it was changing the selected HDG but also it was triggering the knob turning animation (visual feedback):
(L:ASCRJ_FCP_HDG_SEL,·Number)·10·-·dnor·(>L:ASCRJ_FCP_HDG_SEL,·Number)·(L:ASCRJ_FCP_HDG_CHANGE,·Number)·--·(>L:ASCRJ_FCP_HDG_CHANGE,·Number)
Now the script still changes the value, but no longer triggers the knob turning animation.
The only script which still triggers the amination is for V/S selection:
(L:ASCRJ_FCP_WHEEL,·Number)·10·-·dnor·(>L:ASCRJ_FCP_WHEEL,·Number)·(L:ASCRJ_FCP_WHEEL_CHANGE,·Number)·--·(>L:ASCRJ_FCP_WHEEL_CHANGE,·Number)
The script structure is the same, so I have no clue why it works for V/S and doesn't work with HDG and all the other knobs.
The issue was probably introduced with the recent CRJ update.
What am I doing wrong?
2 years ago
I really don't have a clue why it does'nt work......
The scripts in CRJ900_Interior.xml have similar structur for all the rotary knobs, and I dont think anything is changed in the CRJ update:
<!-- Heading Knob -->
<Component ID="ASCRJ_FCP_HDG_SEL_Knob" Node="ASCRJ_FCP_HDG_SEL">
<UseTemplate Name="ASCRJ_Knob_Infinite_Template">
<KNOB_ANIM_NAME>ASCRJ_FCP_HDG_SEL</KNOB_ANIM_NAME>
<CHANGE_VAR_NAME>ASCRJ_FCP_HDG_CHANGE</CHANGE_VAR_NAME>
</UseTemplate>
</Component>
<!-- Wheel Knob -->
<Component ID="ASCRJ_FCP_Wheel_Knob" Node="ASCRJ_FCP_WHEEL">
<UseTemplate Name="ASCRJ_Knob_Infinite_Vert_Template">
<KNOB_ANIM_NAME>ASCRJ_FCP_WHEEL</KNOB_ANIM_NAME>
<INVERT_ANIM>1</INVERT_ANIM>
<CHANGE_VAR_NAME>ASCRJ_FCP_WHEEL_CHANGE</CHANGE_VAR_NAME>
</UseTemplate>
</Component>
May be post a question in the Axis And Ohs forum: https://forums.flightsimulator.com/t/axis-and-ohs-help-and-questions/196415/898
2 years ago
CaptOle
steku
any ideas on how to get access to the spoilers?
2 years ago
I use the simulator event AXIS_SPOILER_SET with Axis min -16383 and max 16383 in Axis And Ohs - no script needed.
2 years ago
CaptOle
JstnJ
I have existing templates for my bravo. How do I apply ur script? From the template? I am not seeing it there. Thanks.
3 years ago
Hi
Load the CRJ in the sim with your existing template. Assign the desired scripts to the buttons of your choise and then save it as a new template with a new name. In this way you make shure you can revert back to the old template if needed.
As simple as that :-)
3 years ago
CaptOle
SkySim
3 years ago
CaptOle
Some more info in this tread:
https://forums.flightsimulator.com/t/axis-and-ohs-help-and-questions/196415/745
3 years ago
CaptOle
3 years ago
3 years ago
CaptOle
DC6Pilot
It works very well.
I have one request.
Could you make a script for the working title CJ4?
I'm having a hard time mapping the altitude adjustment knob.
WT CJ4 is a plane highly praised by many users. It will be worthwhile.
I want to make a script, but I don't know how to do it.
Thank you again.
3 years ago
3 years ago
CaptOle
chunsajihuni
3 years ago
3 years ago
CaptOle
Norwenkel
Best regards
3 years ago
3 years ago
CaptOle
Pilotillo
3 years ago
3 years ago
CaptOle
webstef
- Controls MFD format (PLAN, MAP
HSI, weather radar, TCAS), It is a rotary device that allows changing the MFD formats. Thanks a lot.
3 years ago
3 years ago
CaptOle
Carney
3 years ago
3 years ago
CaptOle
fakeflyer737
Thanks a lot
3 years ago
3 years ago
CaptOle
Carney