Toyama Airport was built in the river because land could not be secured in Japan, where there are few plains. It is designed to submerge the runway if the largest heavy rain hits (because raising the runway narrows the river width and causes floods).
The terminal was built outside the river to prevent it from being submerged.
Therefore, the longest 89-meter boarding bridge in Japan was built from the terminal.
The highway in front of the RWY20 side passes through the middle of the approach lights, so it is painted red and white. There is a "Caution for airplanes" sign on the road. In normal landing, it will fly at a low altitude in the center of Toyama City(Population 410,000) at 1000FT.
The runway is as narrow as 2000M and the apron is small, so the jet plane stops diagonally.
MSFS's Toyama was a poor airport, so I remade it.
Technically, creating a 2km long stone wall was extremely difficult.
Ver1.6
1. I have rebuilt JETWAY.
2. I adjusted the color of the building.
3 I added "dirt" to apron and taxi and turning pad.
4. I made other corrections.
The main changes are shown in Photo 1-8.
The file name has been changed from \h281_toyama to kaze-airport-rjnt-toyama, so please delete the old file first.
Ver1.6
1 jetwayが似ていないので作り変えました。
2 建物や 紅白の橋の白色が鼠色になっていて似ていなかったので白色にしました。
3 距離表示灯のフォントを変えました。
4 エプロンを汚しました。
5 ターニングパッドでくるっと回るときに入るタイヤの汚しを入れました(←3時間かかりました 3枚目写真)
6 趣味でいれていた ILS 109.3 のグライドスロープは 実際の通り 撤去しました。
主な変更は2枚目の写真のとおりですが、
掲載写真10枚の内 9枚 をV1.6の新しい写真におきかえました。8枚目だけ流用
※ご注意事項
ファイル名を¥h281_toyama から kaze-airport-rjnt-toyama に変えましたので 古いファイルを先に削除して下さい。
6 days ago
Mental_G
I tested your airport, and found that the twin jetway deploys incorrectly on the tailgate of a Boeing 737. It is not an MSFS model aircraft, but an FSTL model. I also use GSX PRO, but I had the airport disabled, so it wouldn't use their jetways. However, I did not have the services disabled. In the screenshot in the attached link, you will understand what I mean.
https://1drv.ms/i/s!ArHTVrwPDnEngYkOLYES_1fooG51Ng?e=VpgmEh
3 months ago
3 months ago
KAZE
SpoonMaker71
5 months ago
pbook
9 months ago
DMullert
I'm really enjoying your work as I tour Japan. Thanks for sharing.
1 years ago
Sky173
素晴らしいUpdateあり難うございます。
シーナリー標高調整に係わる面倒な作業本当にご苦労様でした。
また今回のVer1.5-Pro版の同梱も有り難うございます。
LOC Only ApproachでFPAやVS Controlで進入するのは、やはりリアル感があり楽しめます。(LOCの右側へのOffsetも上手く表示されていてGoodでした)
Thank you much!
1 years ago
ありがとうございます。最近クレームしかコメントが入らないので 受信有が来るとドキっとしますが、うれしいコメントでありがとうございます。
1 years ago
KAZE
katsuoji65
Thanks for continuing to update this airport, looks really good! ありがとうございます!
1 years ago
Thank you. I've been feeling unmotivated lately, so it's encouraging.
1 years ago
KAZE
axeldude
Thank you!
2 years ago
Vizipok
Bedankt voor aanpassingen, Echt een geweldige luchthaven waar je kunt zien dat er veel tijd en energie in is gestoken. Ga zo doog
2 years ago
mreynders
更新ありがとうございます。MFS○のを完全に超えました。
2 years ago
それはないと思いますが そういっていただければうれしいです。
2 years ago
KAZE
NezNok
有料版を超えてます。
2 years ago
いやそれはないとおもいます(汗)
2 years ago
KAZE
maids01
Awesome scenery. I wish the jetways were animated. Any chance for OPTIONAL moving jetways (default metal) for those who prefer them animated?
2 years ago
Thank you very much. I'm sad, but I can't make animations.
It's very, very, very difficult.
2 years ago
KAZE
kityatyi
Thank you Kase. A good work in a good place. Very immersive... Thanks to you, I'm preparing my first trip to Japan next year...
2 years ago
Franz1815
Keep it up! Amazing work
2 years ago
totheskies
Since you’ve made the static model for the jetways, maybe I can try to make it animated if you send me the source file.
2 years ago
It is impossible to animate this jetway. This is because I am using a figurine built in MSFS.
2 years ago
KAZE
MisakaSkywalker