Oslo Airport Gardermoen ENGM
Commercial terminal and cargo apron, all ground support equipment moved to realistic positions and all stands comes with custom pushback procedures with reference to real world procedures. Gates 2, 3, 7, 9, 10, 12, 171-179 have walk-in gates where the passangers will walk to and from the terminal. This profile also has docking system for each gate similar to those in real life.
For proper use please know your aircraft code and refer to ground charts to find the correct pushback point for your gate.
This GSX profile was made for freeware Oslo Gardermoen scenery found on flightsim.to
Due to limitation with GSX regarding push and pull procedures, the pushback truck will push you from the inside of the airplane, from the outside it will look weird, but it will work.
Version 1.3
This version include remote de-ice platforms and various updates and adjustments around the airport.
Version 1.3 is compatible to latest GSX version as of 1. October. Due to the latest GSX update you will find some gates are marked as gate, parking and as ramp, so please just go through the different pages to find your parking spot.
This GSX profile was made for freeware ENGM Gardermoen.
Version 1.3, known issues: GSE vehicles will at some gates get in conflict with static ground vehicles.
Due to limitation with GSX regarding push and pull procedures, you may experience some glitching with the plane spinning around, if that happens, please report and will update in a future version.
Military and GA stands on the west side of airfield not included in this version.
There is also a version of this profile without GSX VDGS, if you have another VDGS system installed.
Installation:
Extract the .zip file and move the .ini file to %APPDATA%\Virtuali\GSX\MSFS
If you still have problems try this:
1. open MSFS and go to a random gate at ENGM
3. move some of the ground vehicles somewhere, do this to create an ini file at %APPDATA%\Virtuali\GSX\MSFS.
4. go to %APPDATA%\Virtuali\GSX\MSFS en find ENGM.ini file.
5. open the new ENGM.ini file you just made, check timestamps to make sure its the one you just made. Copy the AFCAD-path of your file ENGM.ini file
6. paste this AFCAD path into the ENGM.ini file that comes with this package
7. save and exit
8. restart MSFS and you are good to go
this should make it work. If it still dont work comment on flightsim.to download page.
Aircraft code guide:
Code A wingspan >15m: Cessna 172, 182, 310 and 525. Hawker Siddeley HS125. Learjet 35, 40, 55 and 60.
Code B wingspan 15-24m: Antonov AN-2 and AN-28. Beech B200 and B350. Cessna 208. Dornier 228. Embraer 110,120,145 and 550. SAAB 340.
Code C wingspan 24-36m: Airbus A220,318,319,320,321. Antonov AN-24 and AN-26. ATR 42 and 72. Boeing 727 and 737. Canadair regional jet. DeHavilland DHC-8 100/200/300/400. Embraer 170,175,190 and 195. Fokker 50,70 and 100. Hawker siddely HS748. Jakovlev Jak-40 and Jak-42.
Code D wingspan 36-52m: Airbus A300 and 310. Antonov AN-12. Boeing 757 and 767. Lockheed C-130. McDonnell Douglas MD-11. Tupolev Tu-204 and Tu-214.
Code E wingspan 52-65m: Airbus A330,340 and 350. Boeing 747,777 and 787.
Code F wingspan 65-80m: Airbus A380. Boeing 747-8.
For other users: When using v2.2 of Hergi's ENGM, there were 27 navdata mismatches in this profile for me. When you go to customize the profile and the warning message pops up, you can create a new profile using only the matching spots and the error should go away. That will delete the following spots:
[parking 312] - [parking 337] (these are already covered by [none 312] - [none 337] )
[gate 18] (already covered by [none 18]
[none 46] (already covered by [gate 46] )
[parking 666]. (already covered by [none 666]
2 days ago
KyleLAX
2 months ago
ColinTW3215
3 months ago
3 months ago
Northwind
Atrius
4 months ago
4 months ago
Northwind
FarlisKaneebe
5 months ago
5 months ago
Northwind
Flight_JanBo
The jetways look like this for me and GSX won't move them.
9 months ago
9 months ago
Northwind
Tsitynevcas
Where can i find the profil without vdgs ?
its not in the rar-file
10 months ago
10 months ago
Northwind
PhiMo
It's not working well for me, I already did the instructions in the description, but it didn't work for me. I use VDGS and the result is this https://imgur.com/a/DLTG8pr
1 years ago
Hello
Yes, the GSX VDGS has to be on top of the static VDGS, because those come with the scenery and I cannot remove them unfortunately. There are two version of this profile, one which has the GSX VDGS and one without, if you choose the one with GSX VDGS that is the only way to make it work. Only the scenery developer can remove the static VDGS.
1 years ago
Northwind
danielrds
1 years ago
TomAce
Is it just me? When i download it i dont get the zip file.
1 years ago
Sebas22
gsx this parking is isolated
1 years ago
Hello
What scenery do you use? I used this https://flightsim.to/file/25434/oslo-gardermoen-airport-engm . Do you have that "isolated parking" problem at other airports as well? or just at ENGM?
1 years ago
Northwind
jonreid1
Hi!
First of all, big up for the great work!
One problem with SU10 for me know is, there are 2 kinds of jetways stacked in each other and I can´t deaktivate the GSX ones in the installer, becouse ENGM isn´t listet there. So jetways don´t connect. Pushbacks semms also not to work correctly (stopped like 50 meters from different gates without straving left or right). I hope you can fix that 😊
2 years ago
Hello, thank you for that!
The problems you are reporting with the jetways might be a scenery issue with SU10, since my profile dont do anything with the jetways, maybe try to reinstall the scenery. I used this scenery https://flightsim.to/file/25434/oslo-gardermoen-airport-engm . For the pushbacks, at ENGM most of the pushbacks are just straight back. Hope it helps :)
2 years ago
Northwind
Kappe
GREAT work with this profile. Will you consider doing one without the GSX docking system (VDGS) because it causes a double display with the noolaero VDGS that comes with the scenery.
2 years ago
Thank you so much for your words. I made a version without GSX VDGS system, so that you can use the noolaero VDGS sytem.
2 years ago
Northwind
Terblanche
After last GSX update your profile does not work anymore 😞
2 years ago
Well, thats not good :( I will look into it
2 years ago
Northwind
EDog97
not getting any animated passengers. baggage carts just dips when i request boarding
2 years ago
Hey
Are you on version 1.2?
2 years ago
Northwind
torskenn