Flightsim.to
    PMCO_FNX32X - Pilot Monitoring Callouts for the FENIX A319/A320/A321 add-on - Image 2

    Description

    First things first:
    If any problems arise, please contact me before writing bad reviews or giving one star ratings.  ;)
    >>>> Please always send me your FSUIPC7.ini and FSUIPC7.log to nils[at]public-files.de after a flight you had problems with. <<<<


     

    This is a FSUIPC7 Lua plugin, which dynamically plays the callouts you would hear from the pilot monitoring (PM) in an Airbus A320 series flight deck during takeoff and landing (including rejected takeoff, go-around and touch-and-go). It is to be used with the FENIX A319/A320/A321 ONLY.

    ####  What it does:

    • The plugin runs automatically upon loading the FENIX A319/A320/A321 add-on.
    • Before takeoff, the V-speeds must be entered on the PERF page of one of the MCDUs (as usual).
    • The following callouts are included:
      • Takeoff: STABILIZED, FLEX SET / TOGA SET, AIRSPEED ALIVE, 100 KNOTS, VEE ONE, ROTATE, POSITIVE CLIMB, CLIMB SET
      • Landing: SPOILERS, REVERSE GREEN, DECEL, 70 KNOTS, AUTOBRAKE OFF
      • Gear confirmation: GEAR UP, GEAR DOWN
      • Flaps confirmation: FLAPS 0, FLAPS 1, FLAPS 2, FLAPS 3, FLAPS FULL
      • Special: STOP (rejected takeoff), STAND UP, GO (touch-and-go)

    PMCO_FNX32X (Takeoff Demo) - YouTube

    PMCO_FNX32X (Landing Demo) - YouTube

    ####  Important notes and prerequisites:

    • Registered version of FSUIPC7 (for MSFS) is required! The free version is not sufficient, unfortunately!
    • Please, follow carefully the included readme for installation instructions (PMCO and FSUIPC + WASM-module)!
      On request, there is now also a video, guidung you through the installation: PMCO_FNX32X (Install Guide) - YouTube
    • If MSFS is run as admin, FSUIPC7 must also be run as admin. Either both or none!

    ####  Credits:

    The default soundset was recorded by Nick Kidd. Big thanks to him!

     


    This (my Lua plug-in) is free to use. However, if you like my work and wish to donate, it would be greatly appreciated: paypal.me/payNilsU
    I wish you safe flights and happy landings!

    Connectez-vous pour participer à la discussion

    Se connecter

    Commentaires(645)

    Commentaire épinglé
    d
    dermobbAuthor

    2 days ago

    Please send me your FSUIPC7.ini and FSUIPC7.log to nils[at]public-files.de after a flight you had problems with.
    Usually, I can see from those two files why it's not working.
    W

    about 18 hours ago

    Hi there,

    I just want to say your Fenix A320 voice callout plugin is absolutely incredible. It’s such a fantastic, well-crafted addon, and it has greatly improved my whole flight simulation experience. I really appreciate all the effort you’ve poured into this project.

    I have one small feature request. At the moment, during takeoff roll, the pack only plays "TOGA set" or "Flex set".
    On real Airbus aircraft, the PM reads out the active FMA modes after setting thrust:
    Man Flex (TOGA), SRS, Runway, Autothrust Blue

    Would you be open to adding this callout sequence in a future update?
    Just a note: the "Runway" call should only activate when the RWY guidance mode is shown on the FMA.
    This would make the takeoff SOP fully match real airline procedures and raise immersion to another level.

    Thank you again for this awesome addon!
    Best regards
    d
    dermobbAuthor

    about 14 hours ago

    I would have to fake all of this, as there is no way to read the FMA through variables (especially the FLEX temperature). There simply are no variables. I prefer not to just fake the callouts. What we have now is the best compromise I could come up with.

    If you really want to fake the sounds, you could record your own soundset. That's a possibility.

    Thanks for your kind words.
    W

    about 11 hours ago

    Many thanks for taking the time to explain this technical barrier to me. I completely get why you are reluctant to implement fake FMA callouts, realism is the core of this sim addon.
    I really appreciate all the hard work you put into this voice pack, it’s still my favourite callout plugin for Fenix A320.
    I may try creating my own custom soundset later.
    Cheers!
    K

    2 days ago

    don`t work for me even do i have done this.
    d
    dermobbAuthor

    2 days ago

    Please send me your FSUIPC7.ini and FSUIPC7.log to nils[at]public-files.de after a flight you had problems with.
    Usually, I can see from those two files why it's not working.
    r

    19 days ago

    Hello :) I have installed it before in MSFS2020 and as I now fly MSFS2024 I install FSUIPC for 2024 but I am not able to transfer files for MSFS2024 :( is there a way I can get help without taking to much of your time ? It would be very nice. Thanks
    d
    dermobbAuthor

    18 days ago

    Please send me your FSUIPC7.ini and FSUIPC7.log to nils[at]public-files.de from the FSUIPC install location for 2024. We will work from there.
    r

    13 days ago

    Hello after a lot of work I made it myself so thank you again sir :) I love PMCO :)))
    p

    about 2 months ago

    Hi, thanks for this wonderful addon. I have all 3 of your callout addons, fenix a320, pmdg 737, and pmdg 777. It works for the Fenix but not the others. Not sure if I put in the correct entries in the FSUIPC7.ini file correctly or not. This is what I have. Could you please verify:

    [Auto]
    1=Lua PMCO_FNX32X
    2=Lua PMCO_PMDG73X
    3=Lua PMCO_PMDG77X

    [LuaFiles]
    1=PMCO_FNX32X
    2=PMCO_PMDG73X
    3=PMCO_PMDG77X
    d
    dermobbAuthor

    about 2 months ago

    What you show is correct, there might be other reasons for it to not work / start. Please send me FSUIPC7.ini and FSUIPC7.log via email after a flight with the PMDG aircraft. I need those files for debugging.
    S

    about 2 months ago

    Using it from beginning, the best
    d

    2 months ago

    good morning sir, i have followed your instructions, i have went from the free version to paid, de installed and reinstalled, twice and still no FSUIPC7.INI folder. i even checked in the back up.ini and there was nothing in there , I have provided 3 pictures as your requested, showing i can not find that file. The PMCO file i have and the file in my community folder.
    d
    dermobbAuthor

    2 months ago

    It's the file with the little cogwheel. You have file extensions disabled, that's why you don't see it like in the video.
    A

    2 months ago

    Thank you.
    Is there any way to add to or modify the files so they work with the FSLabs A321 aircraft?
    z

    2 months ago

    Works perfectly and enhances the experience in the cockpit. Installation was also straightforward Thanks for creating this.
    J

    3 months ago

    Ola boa tarde nao consigo instalar tenho a versão paga do FSUIPC7
    d
    dermobbAuthor

    2 months ago

    >>>> Please always send me your FSUIPC7.ini and FSUIPC7.log to nils[at]public-files.de after a flight you had problems with.
    r

    3 months ago

    Hello I install the new FSUIPC for MSFS2024 I copied the old WASM folder 2020 in msfs2024 but I did not yet copy the ini files as my folders are not the same inside and I dont have a clue why ?? I dont know what I have done. I send you a pic to show you. Also I dont see lua 32NX inside the folder. The FSUIPC folder for 2020 is name FSUIPC7 for your info. I know I am not the best with copy and paste :(
    ...
    MSFS 2020MSFS 2024

    PMCO_FNX32X - Pilot Monitoring Callouts for the FENIX A319/A320/A321 add-on

    This is a FSUIPC7 Lua plugin, which dynamically plays the callouts you would hear from the pilot monitoring (PM) in an Airbus A320 series flight deck during takeoff and landing (including rejected takeoff, go-around and touch-and-go). For FENIX A319/A320/A321 ONLY.

    Téléchargements23K
    Version1.11
    Taille du fichier5.67 MB
    PubliéIl y a 4 ans
    Mis à jourIl y a 7 mois

    Avis des utilisateurs

    4.9

    106 avis

    5
    93%
    4
    3%
    3
    0%
    2
    0%
    1
    0%

    Historique des versions

    added: >>> support for A319 SL (CFM and IAE) >>> correct AIRBUS lingo flaps callout 'FLAPS ZERO' ('FLAPS UP' remains available in the download, just rename the files...) fixed: >>> late usage of some Fenix LVars to avoid crashes

    Similaires