Description
Flying Flea HM 293 for Microsoft Flightsimulator 2020
The Flying Flea is an aircraft designed by Henri Mignet in a spirit of simplicity, safety and low cost. He offered the plans to everyone by means of a book, Le Sport de L'air, published in 1934. (excerpt from wikipedia)
Here it is the HM 293 model, evolution of the original model the HM14
It is only piloted on two axes: the pitch axis and the yaw axis.
The handle actuated in depth acts directly on the front wing by modifying the incidence of this wing and therefore the lift.
The rear wing is fixed.
The laterally operated stick (warping) acts on the rudder. As there are no ailerons, turning is therefore carried out by induced roll.
The pedals which are at the feet of the pilots act only on the right and left brakes what makes it possible to direct the louse on the ground (differential brakes) the wheel of nose being free.
These particularities require the simulator controls to be adapted.
Personally I assigned the steering axis to the warping stick and to the rudder I only kept the brakes.
The wings fold up with the spoilers command (it's up to you to assign a key or button to the "spoiler rocker" command)
To start the engine:(explanatory video on: https://youtu.be/PuWl9GDsoWM)
Battery on
Magneto 1 (ALL1) set to on
Magneto 2 (ALL2) on
Fuel pump 1 on
Alternator on
Press START button. Attention the flyng flea having no parking brake, it is necessary to maintain the pedals of brakes pressed the time of the starting
The Ctrl+E method only works if the plane is parked in the parking lot or on the runway.If this is not the case, you must start the power normally or put the fuel pump on before applying Ctrl+E.
You will find a screenshot of my control settings in the my documents folder as well as some photos of the real aircraft registered F-POUX, which served as my model at the request of its owner.(contact on http://oldpat.e-monsite.com/)
A paint kit folder including all the textures in .psd format will allow you to customize your plane.
This model is completely free and should not be the subject of any paid transaction.
Modifications or improvements are permitted subject to authorization by me and the owner of the actual aircraft.
Do not hesitate to visit the site http://pouguide.org/ in order to better know this extraordinary Flying Flea.
Good flight aboard Flying Flea HM 293
Patrick Le Luyer (http://oldpat.e-monsite.com/)
Commentaires(40)
Connectez-vous pour participer à la discussion
Se connecter9 months ago
Thank you for your message and good flight
over 1 year ago
I always train after a long break in real flying
over 1 year ago
i am working on another project, when it's finished and I have MSFS 2024, I think I'll convert all my creations.
I know that the guépard works well under 2024, but not thepou du ciel, why????
over 2 years ago
over 2 years ago
almost 3 years ago
Excellent! A fun and unique little airplane. Perhaps you may consider a couple of new paints including something British so that I may begin a formation flight... Thanks.
almost 3 years ago
May be you have some screen for exemple
Thank you for your comment
almost 3 years ago
hi, here is on example. Maybe you can make believe another and call it G-FLEA :) Thank you.
https://www.facebook.com/groups/2116325795355409/posts/3058981751089804/
about 3 years ago
how do i get the wing fold?
about 3 years ago
wings fold and unfold with simulator spoilers command, (See readme.txt file in docs)
Pou du ciel HM293
The Flying Flea is an aircraft designed by Henri Mignet in a spirit of simplicity, safety and low cost. He offered the plans to everyone by means of a book, Le Sport de L'air, published in 1934. Here it is the HM 293 model, evolution of the original model the HM14
Avis des utilisateurs
11 avis
More Information
Historique des versions
Mise à jour du cockpit : -Ajout de l'effet de pluie sur le pare brise bien que le vol par temps pluvieux ne soit pas conseillé!! -Supression de la visibilité des objets extérieurs dans le cockpit (herbe...)
Similaires
Aeroservice Super Guepard
Experience the ULM Super Guépard in Microsoft Flight Simulator 2020 with this detailed Blender model by Patrick LE LUYER. Equipped with an 80hp Rotax engine, simple startup procedures, and customizable features, take to the skies in style. Explore the included documents for real characteristics, cockpit commands, and a paint kit for personalization. Fly for free and enjoy the craftsmanship of the Super Guépard by Aeroservices.
par oldpat
Souricette MB02
Souricette is an amateur-built ultralight. Designed by Michel Barry, he built the prototype and made the first flight on February 13, 1993 at La Ferté Allais. Since then many passionate amateurs have built their own Souricette and fly with it. To learn more about this Mouse, go to the Air Mouse Set website
par Patrick LE LUYER
Kiebitz 405
The Kiebitz 405 is a detailed simulation of the Platzer Kiebitz, a tandem two-seater ultralight biplane. Modeled in Blender using the MSFS 2020 SDK, this add-on features fully animated components and functional cockpit controls, developed with input from a real pilot. A checklist is included for operations, and customization options are available through a paint kit folder. Additional historical and informational resources are provided within the add-on.
par oldpat
Super Guépard 100HP
The Super Guépard 100HP is a detailed ULM aircraft modeled for Microsoft Flight Simulator 2020, developed by Patrick Le Luyer. This aircraft is equipped with a 100hp Rotax engine and features a straightforward startup procedure. Included in the download are a comprehensive checklist, manufacturer specifications, cockpit command layouts, and a paint kit for customization. The add-on is entirely free, with options for modifications permitted upon request.
par oldpat
9 months ago