GSX profile for PHNL Daniel K. Inouye / Honolulu International Airport by LimaJuliet

The scenery can be found here: https://flightsim.to/file/49601/phnl-daniel-k-inouye-international-airport-honolulu

Please note:

• This is NOT meant to be reflective of real-world procedures at PHNL. I only started working on this profile because I noticed that the default GSX positioning was quite off for ground vehicle positions and the marshallers.
• All I am trying to do is make the airport more useable for myself and other GSX users, particularly those using larger aeroplanes.
• As such, I've often taken the simplest path to fixing issues, so this will not match the real-world setup of PHNL.

What's included:

• Stands customised:
  • Terminal 1
    • All A stands (A16 is not modelled)
    • All B stands (B3 is not modelled)
    • Operator has been set to Hawaiian Airlines for all Terminal 1 stands
  • Terminal 2
    • All C stands (C4 & C9 for the A380 in real life, though a couple others have been modified to accept Code F wingspans as well)
    • All D, E, F, & G stands
  • Terminal 3: H1
• The scenery provides almost no heavy gates, so I've amended some gates that looked to have enough space to count as heavy instead of medium (and some smalls to mediums). Customised stop positions per the ground markings and what makes sense.
• Organised gates by terminal & concourses in GSX menu, and sorted out miscellaneous or incorrectly labelled gates.
• Pushbacks
• Cleaned up ground vehicle placements so that they don't clip into the terminal building or the scenery clutter
• Added VDGS units to stands that do not have sufficient spacing for visibility of marshaller.
• Custom gate passengers and walkers where possible

Limitations and issues:

• On the A gates that have a visible terminal interior, for some reason the walkers may not show up, I'm not sure why.
• Quite a few of the heavy and medium gates bleed onto neighbouring gates, which may cause issues with AI aircraft, particularly with Terminal 1.
• Gates A1 & A2 have ground elevation issues that cause GSX to terminate pushback when attempting a reasonable pushback procedure, so had to do a janky workaround.
• Some stands are not modelled in the scenery. Terminal 3 is not modelled either, though I have still placed stand H1.
• Some stop positions may not have saved properly, do let me know if you catch any of these instances.

Installation:

You can extract the 'PHNL-Skybreaker.ini' and 'PHNL-Skybreaker.py' files to: 'C:\Users\[Your Username]\AppData\Roaming\virtuali\GSX\MSFS'

OR

I would highly recommend Elevate Solution's 'Drag&Drop Installer for GSX Pro Profiles' on this site that can be found here.

Note:

If there are any issues with the profile in terms of functionality, let me know and I'll fix it when I can. If you have feedback regarding making the procedures align more with the real world, please only let me know if they're straightforward changes (and provide reference information if possible, I have no personal experience with PHNL). As I said earlier, this is something I'm doing for usability only, I have limited time, and I'm not particularly experienced with GSX, so anything above and beyond isn't in my interests right now. Thank you for your understanding.