Flightsim.to
    123flightSOUND v4.0 | FlightSound Assist, GSX Linked Cabin Flow, VR Panel & Custom Sound Packs - Image 2

    Description

    -> Join Discord for Support!
    https://discord.gg/mshqUQMmMb


    ✈️ 123flightSOUND v4.0 — FlightSound Assist Release

    Bring your cockpit to life with automated cabin announcements, boarding music and ambient cabin atmosphere for Microsoft Flight Simulator 2020 and 2024.

    123flightSOUND is a lightweight Windows companion app for MSFS. It adds a realistic passenger-cabin layer to your flights without touching aircraft systems, without affecting FPS and without locking you into one airline or aircraft type.

    Version 4.0 is a major workflow update. The old automation concept has been replaced by FlightSound Assist — a clearer, safer and more predictable way to control the cabin flow.

    🔥What is new in v4.0?

    FlightSound Assist

    FlightSound Assist gives you two explicit modes:

    Sim Flow
    Uses aircraft phase, timing profile and SimConnect data to trigger the cabin sequence automatically.

    GSX Linked
    Uses GSX service states when GSX is available and when you select this mode. Boarding, refueling, catering, pushback and deboarding are handled more intelligently, so announcements and music happen at more believable moments.

    Important: 123flightSOUND only reads GSX-related states. It does not control GSX.

    🔥Better cabin timing

    Version 4.0 improves the most important flow moments:

    • Boarding Music starts when boarding is actually active, not merely requested.
    • Welcome waits until boarding is completed.
    • Welcome is held while refueling or catering is still active.
    • Safety and departure cues wait for cleaner departure conditions.
    • Arrival no longer immediately jumps back into boarding music after landing.
    • Deboarding music follows the deboarding state more naturally.
    • Runway and mid-flight starts wait for fresh simulator data before arming any gate sequence.

    🔥New InGame / VR panel

    The MSFS toolbar panel has been cleaned up for cockpit use.

    It is now a focused remote panel instead of a desktop settings clone. You can start or pause FlightSound Assist, stop all sounds, switch sound packs and manually trigger the main sound buttons directly inside the simulator.

    Advanced setup stays in the desktop app where it belongs: Assist mode, timing profile, volume setup, audio output and custom sound assignment.

    🔥Own Sound Pack

    Version 4.0 adds an Own Sound Pack workflow. You can assign your own MP3 files while keeping the default sound packs separate.

    The first-start guide explains how to assign custom sounds, restore defaults and set up the app properly.

    🔥Audio output selection

    You can now select the audio output from the tray menu. This is useful if you want 123flightSOUND to play through a different device than your simulator.

    🔥Safer MSFS installation

    The installer has been hardened for MSFS autostart handling:

    • Existing third-party EXE.xml entries are preserved.
    • Backups are created before changes.
    • Invalid EXE.xml files are not overwritten.
    • The uninstaller removes only 123flightSOUND entries and panel folders.

    🛠 Core Features

    • Automated cabin announcements
    • Boarding music
    • Cabin ambient loops
    • Manual soundboard buttons
    • SimConnect-based flight awareness
    • FlightSound Assist with Sim Flow and GSX Linked modes
    • MSFS 2020 and MSFS 2024 support
    • InGame / VR toolbar panel
    • Own Sound Pack support
    • Tray audio-output selection
    • Language/profile-based sound packs
    • Lightweight desktop companion app
    • No account required
    • No impact on aircraft systems

    Notes

    123flightSOUND is designed as an independent cockpit companion tool. It is not affiliated with Microsoft, Asobo, iniBuilds, Fenix, PMDG, GSX or any airline.

    GSX Linked mode is a read-only helper mode. It follows available GSX service states but does not control GSX.

    Stop flying in silence. Let your cockpit breathe.

    Windows SmartScreen may appear because the app is new and not code-signed yet. The source code and release notes are available on GitHub.


    ✈️ 123flightSOUND v4.0 — FlightSound Assist Release

    Bring Leben in dein Cockpit: automatische Kabinenansagen, Boarding Music und realistische Ambient-Sounds für Microsoft Flight Simulator 2020 und 2024.

    123flightSOUND ist eine schlanke Windows Companion App für MSFS. Sie ergänzt deine Flüge um eine realistische Kabinenebene, ohne Flugzeugsysteme zu verändern, ohne FPS zu kosten und ohne dich auf eine bestimmte Airline oder ein bestimmtes Flugzeug festzulegen.

    Version 4.0 ist ein großes Workflow-Update. Das alte Automatik-Konzept wurde durch FlightSound Assist ersetzt — klarer, sicherer und besser nachvollziehbar.

    🔥Was ist neu in v4.0?

    FlightSound Assist

    FlightSound Assist bietet zwei klare Modi:

    Sim Flow
    Nutzt Flugphase, Timing-Profil und SimConnect-Daten, um die Kabinenabläufe automatisch auszulösen.

    GSX Linked
    Nutzt GSX-Servicezustände, wenn GSX vorhanden ist und dieser Modus aktiv ausgewählt wurde. Boarding, Refueling, Catering, Pushback und Deboarding werden dadurch deutlich sauberer berücksichtigt.

    Wichtig: 123flightSOUND liest GSX-bezogene Zustände nur aus. Das Tool steuert GSX nicht.

    🔥Besserer Kabinenablauf

    Version 4.0 verbessert die entscheidenden Flow-Momente:

    • Boarding Music startet erst, wenn Boarding wirklich aktiv ist.
    • Welcome wartet auf abgeschlossenes Boarding.
    • Welcome bleibt blockiert, solange Refueling oder Catering noch aktiv sind.
    • Safety und Departure warten auf sauberere Abflugbedingungen.
    • Nach der Landung springt die App nicht sofort wieder in Boarding Music zurück.
    • Deboarding Music folgt dem Deboarding-Zustand natürlicher.
    • Starts auf der Runway oder im Flug warten auf frische Simulator-Daten, bevor eine Gate-Sequenz aktiviert wird.

    🔥Neues InGame-/VR-Panel

    Das MSFS Toolbar Panel wurde für die Nutzung im Cockpit vereinfacht.

    Es ist jetzt ein fokussiertes Remote-Panel statt einer Kopie der Desktop-App. Du kannst FlightSound Assist starten oder pausieren, alle Sounds stoppen, Sound Packs wechseln und die wichtigsten Soundbuttons direkt im Simulator auslösen.

    Erweiterte Einstellungen bleiben bewusst in der Desktop-App: Assist-Modus, Timing-Profil, Volume Setup, Audio-Ausgabe und Custom Sound Assignment.

    🔥Own Sound Pack

    Version 4.0 bringt einen Own Sound Pack Workflow. Du kannst eigene MP3-Dateien zuweisen, ohne die Standard-Soundpacks zu vermischen.

    Der neue First Start Guide erklärt die Sound-Zuweisung, Restore-Funktion und Grundeinrichtung.

    🔥Audio-Ausgabeauswahl

    Die Audio-Ausgabe kann jetzt über das Tray-Menü gewählt werden. Das ist praktisch, wenn 123flightSOUND über ein anderes Gerät laufen soll als der Simulator.

    🔥Sicherere MSFS-Installation

    Der Installer wurde beim MSFS-Autostart deutlich robuster gemacht:

    • Bestehende fremde EXE.xml-Einträge bleiben erhalten.
    • Vor Änderungen werden Backups erstellt.
    • Ungültige EXE.xml-Dateien werden nicht überschrieben.
    • Der Uninstaller entfernt nur 123flightSOUND-Einträge und Panel-Ordner.

    🛠 Kernfunktionen

    • Automatische Kabinenansagen
    • Boarding Music
    • Cabin Ambient Loops
    • Manuelle Soundboard-Buttons
    • SimConnect-basierte Flugerkennung
    • FlightSound Assist mit Sim Flow und GSX Linked
    • Unterstützung für MSFS 2020 und MSFS 2024
    • InGame-/VR-Toolbar-Panel
    • Own Sound Pack Support
    • Audio-Ausgabeauswahl im Tray
    • Sprach-/Profilbasierte Soundpacks
    • Schlanke Windows Companion App
    • Kein Account nötig
    • Kein Eingriff in Flugzeugsysteme

    Hinweise

    123flightSOUND ist ein unabhängiges Cockpit Companion Tool. Es besteht keine Verbindung zu Microsoft, Asobo, iniBuilds, Fenix, PMDG, GSX oder einer Airline.

    GSX Linked ist ein read-only Hilfsmodus. Der Modus folgt verfügbaren GSX-Servicezuständen, steuert GSX aber nicht.

    Flieg nicht weiter in steriler Stille. Lass dein Cockpit leben.

    Hinweis: Das Tool ist Open Source und absolut sicher. Falls Windows SmartScreen eine Warnung anzeigt, klicke einfach auf „Trotzdem ausführen“.

    Code signing provided by SignPath Foundation

    Commentaires(184)

    Connectez-vous pour participer à la discussion

    Se connecter
    n

    20 days ago

    Hello I like this tool only thing I wish is that sound, only played when focus is on MSFS, or give that an options since I use the mute sounds when MSFS focus not active setting in MSFS 2024.

    Thanks!
    D
    DLH2451Author

    17 days ago

    Thanks for the feedback. That makes sense. I’ll add an optional setting so cabin sounds can be played only while MSFS is the active foreground window. It will stay optional because some users still want sounds while using charts, browser, or Discord on another window. We will bring that in the next Update!
    U

    23 days ago

    This comment has been deleted
    w

    25 days ago

    Works great. Thank you.
    D
    DLH2451Author

    25 days ago

    thank you sir!
    P

    25 days ago

    Can you change the volume of the announcements in the newest version?
    D
    DLH2451Author

    25 days ago

    you can change every volume you want. just open the app in the windows tray! :-)
    B

    28 days ago

    This has potential but I highly recommend turning down to zero volume Cabin Ambient & Boarding Music.... As for the USA, there is not a proper Arrival Crosscheck... Just needs the announcement as equal to Welcome Announcement.... I have not tested in Auto-Play Beta.... Must Install by unzipping the executable then installing as administrator.... Needs work and honestly with Payware Commercial Aircraft this should not even be a necessity. These simulator event sound SHOULD BE BUILT IN with the highway robbery pricing, but the developer is trying to fill the gap and feature set... Look forward to future development including Cabin Crew, prepare for departure/take-off...
    D
    DLH2451Author

    25 days ago

    there fore you can adjust each sound in each language sir. enjoy! and Cabin Crew, prepare for departure/take-off is allready done. have fun!
    l

    29 days ago

    Ingame panel is still unusable in VR. Even resizing doesn't help. The timing of the most announcements is still wrong for me. E.g. "Cabin crew-prepare for landing" at the TOD is much to early. Welcome Announcement after 90sec is much to early. At this moment, GSX is just refueling. Boarding begins for me after refueling and catering (5 min?). As long as there is no GSX integration, it will always remain buggy. Sorry for the criticism.... Danke trotzdem für die Arbeit!
    D
    DLH2451Author

    25 days ago

    we are working on that!
    D
    DLH2451Author

    about 1 month ago

    -> Join Discord for Support!
    https://discord.gg/ndFbzhYv

    DID YOU TRY?

    123flightARRIVAL 2.0 | Long Haul Wake-Up & TOD Phone Alerts Windows App


    123flightARRIVAL 2.0 is a lightweight Windows companion app for Microsoft Flight Simulator 2020 and 2024 designed for long-haul flights. The tool monitors your loaded SimBrief or MSFS flight plan to calculate your Top of Descent and provides local and phone alerts to notify you before descent. Features include Simconnect integration, SimRate awareness, and route summaries. The standalone app operates without affecting simulator performance and does not require an account. Now with Pause on TOD Option.

    https://flightsim.to/addon/108163/123flightarrival-long-haul-wake-up-tod-phone-alerts-windows-app
    D
    DLH2451Author

    about 1 month ago

    -> Join Discord for Support!
    https://discord.gg/ndFbzhYv

    *** IMPORTANT HOTFIX *** PLEASE UPDATE! ***

    Over the last few hours, we released several updates in a very short time. That was not ideal, and we want to apologize for the inconvenience.

    The reason was an installer issue that, under certain setups, could affect the MSFS EXE.xml. This may have interfered with other programs that also start automatically with Microsoft Flight Simulator.

    We have now adjusted the installer:

    123flightSOUND only removes its own autostart entries
    other EXE.xml entries are left untouched
    overly broad cleanup rules have been removed
    the installer flow has been simplified for better stability

    Please install the latest hotfix version. If you installed one of the previous versions released during the last few hours, we recommend fully uninstalling it first and then installing the latest hotfix.

    We are sorry for the unnecessary trouble. This installer fix should have been tested more carefully before release.

    Thank you for your patience and for the quick feedback.

    --------------------------------

    In den letzten Stunden gab es mehrere Updates in sehr kurzer Zeit. Das war nicht ideal, und wir möchten uns dafür entschuldigen.

    Der Grund war ein Installer-Problem, das unter bestimmten Setups Auswirkungen auf die EXE.xml haben konnte. Dadurch konnten andere Programme, die ebenfalls über MSFS automatisch gestartet werden, beeinträchtigt werden.

    Wir haben den Installer jetzt angepasst:

    123flightSOUND entfernt nur noch eigene Autostart-Einträge
    fremde EXE.xml-Einträge bleiben unangetastet
    alte, zu breite Cleanup-Regeln wurden entfernt
    der Installer wurde auf einen stabileren Ablauf reduziert

    Bitte installiert die aktuelle Hotfix-Version. Wenn ihr eine der vorherigen Versionen aus den letzten Stunden installiert habt, empfehlen wir, diese zuerst vollständig zu deinstallieren und danach den aktuellen Hotfix neu zu installieren.

    Es tut uns leid für den unnötigen Aufwand. Wir hätten diesen Installer-Fix sauberer testen müssen, bevor wir ihn veröffentlicht haben.

    Danke für eure Geduld und für die schnellen Rückmeldungen.
    P

    about 1 month ago

    Hallo, kann es sein das nach dem letzten Update in der exe.xml ein Fehlerhafter Eintrag drin ist? Meine anderen Programme starten nicht mehr!
    Grüße Peter
    D
    DLH2451Author

    about 1 month ago

    dürfte nicht auf allen testsystemen einwandfrei. aber ich prüfe das kurz. sekunde...
    D
    DLH2451Author

    about 1 month ago

    du hattest recht. hotfix ist schon da!
    D
    DLH2451Author

    about 1 month ago

    -> Join Discord for Support!
    https://discord.gg/ndFbzhYv

    V 3.6.1 — Stability Fix

    English
    Mid-flight Auto-Play start
    Auto-Play no longer starts the full boarding sequence when enabled during cruise or another mid-flight phase. The app now waits for stable real SimConnect data before arming the gate sequence.
    MSFS / VR panel sizing
    Improved initial panel sizing and scroll behavior so the toolbar panel should no longer open too small and the lower button area is no longer clipped.
    Installer startup reliability
    The installer has been adjusted for faster, more reliable startup and no longer runs blocking PowerShell detection while the setup UI is opening.

    Deutsch
    Auto-Play Start im Flug
    Auto-Play startet nicht mehr die komplette Boarding-Sequenz, wenn es während Cruise oder einer anderen Flugphase aktiviert wird. Die App wartet jetzt auf stabile echte SimConnect-Daten, bevor die Gate-Sequenz freigegeben wird.
    MSFS / VR Panelgröße
    Verbesserte Initialgröße und Scrollbarkeit des Toolbar-Panels, damit es nicht mehr zu klein öffnet und der untere Buttonbereich nicht mehr abgeschnitten wird.
    Installer-Start stabilisiert
    Der Installer wurde für einen schnelleren und zuverlässigeren Start angepasst und führt beim Öffnen der Setup-Oberfläche keine blockierende PowerShell-Erkennung mehr aus.
    s

    about 1 month ago

    it doset opens for me
    D
    DLH2451Author

    about 1 month ago

    sometimes under windows try the follwing. unzip the setup exe. not open inside the zip file. then use right mouse klick and run as administrator. this will work. otherwise, feel free to message me via pm. i will help you.... :-)
    D
    DLH2451Author

    about 1 month ago

    -> Join Discord for Support!
    https://discord.gg/ndFbzhYv
    ...
    MSFS 2020MSFS 2024

    123flightSOUND v4.0 | FlightSound Assist, GSX Linked Cabin Flow, VR Panel & Custom Sound Packs

    Automated cabin announcements, boarding music and ambient sound for MSFS 2020/2024. Version 4.0 introduces FlightSound Assist with Sim Flow and GSX Linked modes, a cleaner InGame/VR panel, Own Sound Pack support, audio-output selection and safer MSFS autostart handling.

    Téléchargements4K
    Version4.0
    Taille du fichier226.1 MB
    PubliéIl y a 2 mois
    Mis à jourIl y a 2 semaines

    Avis des utilisateurs

    4.6

    27 avis

    5
    81%
    4
    7%
    3
    7%
    2
    0%
    1
    4%

    More Information

    Simulateur
    MSFS2020/24
    CatégorieUtilities
    Sub-CategoryApplications

    Historique des versions

    *** V 4.0.0 — FlightSound Assist Release *** English GSX Linked FlightSound Assist FlightSound Assist can now follow real GSX Pro service states instead of relying only on fixed timers. Refueling and catering hold Welcome, Boarding Music starts when GSX boarding becomes active, never on Boarding requested, Welcome waits for boarding completed and stops Boarding Music after the PA, and Departure follows GSX departure, pushback or taxi-out conditions. GSX Pro 4.x vehicle states Added read-only support for GSX Pro 4.x vehicle-state signals including fuel truck, catering, pushback tug, passenger bus, stairs, baggage, de-ice, GPU, water and lavatory. High-level GSX service states remain the primary logic so jetway boarding still works without a physical vehicle. FlightSound Assist mode is explicit The old automation wording is replaced by a visible FlightSound Assist card with two clear modes: Sim Flow and GSX Linked. Start Assist now waits for fresh SimConnect samples before arming gate timers, so runway and in-air starts do not inherit stale Boarding state. Arrival and departure handoff After boarding completed, the UI no longer stays stuck in a waiting/boarding state during pushback. After landing, GSX Linked waits for taxi-to-gate and active deboarding instead of immediately restarting boarding music from Sim timing. Deboarding requested does not start music; deboarding active can start ground music and completed stops it again. MSFS / VR panel upgraded The InGame panel is now one responsive toolbar panel with no separate 2D/VR mode switch. It keeps FlightSound Assist status, Start/Pause Assist, Stop All, optional Skip Next, sound-pack switching and the manual sound buttons. Installer trust and autostart Installer handling for EXE.xml is safer: timestamped backups, invalid XML is not overwritten, third-party Launch.Addon entries are preserved, install reports are written, and MSFS autostart now opens the app visibly so users can adjust volume and flow settings. Tray audio output The Windows audio output can now be selected from the tray right-click menu. The selected device is stored and applied to new and active supported audio players. Own Sound Pack The start screen now includes Own Sound Pack. It starts with the EN/USA defaults while storing custom sound assignments separately from the included language packs. Single first-start guided tour One guided tour now appears on first start and explains volume setup, custom MP3 sound assignment, right-click restore and Own Sound Pack. The same tour can be reopened anytime from the First Start Guide button on the language/profile selection screen. Fresh reinstalls force the guide again even when Windows preserved app data. After the guide is closed, the v4 changelog opens automatically, so onboarding and release notes both appear without competing modals. The dialog has one clear Got it action plus the close icon. Desktop UI polish and audio mix Desktop UI polish removes scale interaction and sub-10px CSS text, stabilizes header/status overflow and internal scrolling, and fresh installs get a calmer default mix for Cabin Ambient, Boarding Music and Arrival Crosscheck. Release checks and v4 metadata Version metadata, installer artifact, feedback metadata, MSFS panel manifests and release scripts are aligned to v4.0.0. npm run dist is available as an alias for dist:release. Deutsch GSX Linked FlightSound Assist FlightSound Assist kann jetzt echten GSX-Pro-Servicezuständen folgen, statt nur mit festen Timern zu arbeiten. Refueling und Catering halten Welcome zurück und werden vor dem Abspielen erneut geprüft. Boarding Music startet wenn GSX Boarding active meldet, niemals schon bei Boarding requested; Welcome wartet auf Boarding completed und stoppt danach Boarding Music, Departure folgt GSX Departure, Pushback oder Taxi-Out. GSX Pro 4.x Fahrzeugzustände Read-only-Unterstützung für GSX-Pro-4.x-Fahrzeugzustände ergänzt: Fuel Truck, Catering, Pushback Tug, Passenger Bus, Stairs, Baggage, De-Ice, GPU, Water und Lavatory. Die High-Level-GSX-Servicezustände bleiben Hauptlogik, damit Jetway-Boarding ohne physisches Fahrzeug sauber funktioniert. FlightSound Assist Mode ist eindeutig Die alte Automatik-Wortwahl wurde durch eine sichtbare FlightSound-Assist-Karte mit zwei klaren Modi ersetzt: Sim Flow und GSX Linked. Start Assist wartet jetzt auf frische SimConnect-Samples, bevor Gate-Timer armiert werden, damit Runway- und In-Air-Starts keinen alten Boarding-Zustand übernehmen. Arrival- und Departure-Übergabe Nach Boarding completed bleibt die Anzeige beim Pushback nicht mehr in Waiting/Boarding hängen. Nach der Landung wartet GSX Linked auf Taxi-to-Gate und aktives Deboarding, statt über Sim-Timing sofort wieder Boarding Music zu starten. Deboarding requested startet keine Musik; Deboarding active kann Ground Music starten und Completed stoppt sie wieder. MSFS / VR Panel verbessert Das InGame-Panel ist jetzt ein einzelnes responsives Toolbar-Panel ohne getrennten 2D/VR-Umschalter. Es behält FlightSound-Assist-Status, Start/Pause Assist, Stop All, optional Skip Next, Sound-Pack-Auswahl und manuelle Soundbuttons. Installer-Vertrauen und Autostart EXE.xml wird sicherer behandelt: timestamped Backups, ungültige XML wird nicht überschrieben, fremde Launch.Addon-Einträge bleiben erhalten, Install-Reports werden geschrieben und MSFS-Autostart öffnet die App sichtbar, damit Nutzer Lautstärke und Flow einstellen können. Audioausgang im Tray Der Windows-Audioausgang ist jetzt über das Tray-Rechtsklickmenü auswählbar. Die Auswahl wird gespeichert und auf neue sowie unterstützte aktive Audio-Player angewendet. Own Sound Pack Auf der Startseite gibt es jetzt Own Sound Pack. Es startet mit den EN/USA-Defaults, speichert eigene Soundbelegungen aber separat von den mitgelieferten Sprachpaketen. Eine Guided Tour beim ersten Start Eine einzige Guided Tour erscheint beim ersten Start und erklärt Lautstärke-Setup, eigene MP3-Sounds, Rechtsklick-Restore und Own Sound Pack. Dieselbe Tour kann jederzeit über den First-Start-Guide-Button auf der Sprach-/Profilwahl erneut geöffnet werden. Frische Neuinstallationen erzwingen die Tour erneut, selbst wenn Windows alte App-Daten behalten hat. Nach dem Schließen der Tour öffnet automatisch das v4-Changelog, damit Onboarding und Release Notes erscheinen, ohne gegeneinander zu laufen. Der Dialog hat nur noch eine klare Got-it-Aktion plus das Schließen-X. Desktop-UI-Polish und Audio-Mix Desktop-UI-Polish entfernt Scale-Interaktion und CSS-Text unter 10px, stabilisiert Header-/Status-Overflow und internes Scrolling. Neue Installationen bekommen einen ruhigeren Default-Mix für Cabin Ambient, Boarding Music und Arrival Crosscheck. Release-Checks und v4-Metadaten Version, Installer-Artifact, Feedback-Metadaten, MSFS-Panel-Manifeste und Release-Skripte sind auf v4.0.0 synchronisiert. npm run dist ist als Alias für dist:release verfügbar.

    Similaires