Corona Municipal is in Riverside county, California, approx. 40 miles east of Los Angeles. It's an uncontrolled airport and is home to 300-350 general aviation aircraft. It's strictly a recreational airport with no commercial flights. 

Corona airport is well known because of its close proximity to aircraft shop "Aircraft Spruce". It has also few businesses, such as a cafe "Corona Cafe", "Flying Academy" flight training center, and aircraft maintenance and repair.

FEATURES

• Replace all AI generated buildings with more realistic stock/free MSFS objects
• Add custom ground painting and replace all aprons textured
• Add hundreds of small objects to make the airport a more living and immersive environment. Mostly with stocked objects which requires no 3rd party library. See requirements below.
• Add dozen of static aircraft because in the real world Corona has a lot of home permanent airplanes on ramp. Caution: It could impact your performance.
• Add several handcrafted objects all around the field (sign, ad, iconic objects, poles light)
• Special attention to the fuel island and fuel station/tanks with handcrafted objects
• Add several new startup positions including two helipads
• Add all fences around the airport (thanks to vectorplacement SDK features)
• Add a lot of signs and boards here and here on buildings
• Extensive work to clean the underlying Bing texture
• Clean all night blue poles (still wip). Add passive blue sticks when exist in real.
• Fix the two windsock positions
• Remove all non-existent taxiway signs
• VFR Reporting point : repaint of the Prado Dam Spillway (Freedom Mural has been restored mid 2023) on downwind runway 7 (VPLPD). Add Paradise (PDZ) VOR object

MORE INFO FOR PILOTS

One single runway 7-25, elevation 533 MSL, 3,200 feet long by 60 feet wide. 100LL and Jet-A fuel is available at the fuel island.
Noise abatement procedures:

• Runway 25: straight-in approach not recommended. Avoid flying over houses on bluff at east end. Fly over wash/creek.
• Runway 07 requires a 15 degrees right turn at departure end to follow wash/creek.
• No turns onto crosswind leg until aircraft is within 300 ft of recommanded TPA.
• Obstacles: Runway 25: 6 ft Fence 200 ft from runway. Runway 7: 40 ft Trees 400 ft from runway
• No intersections departures.

Skyvector: https://skyvector.com/airport/AJO/Corona-Municipal-Airport
Airnav: https://airnav.com/airport/KAJO

REQUIREMENTS

• "Prado Reservoir and Corona Improvement" by MojaveHigh : https://flightsim.to/file/30463/prado-reservoir-and-corona-improvement This addon removes the excess water, but leaves some near the dam, and removes the surrounding spike trees.
• (MSFS2020 only) MSFS World Update Canada
• (MSFS2020 only) MSFS World Update USA II and X
• (MSFS2020 only) Sedona (KSEZ) MSFS default Scenery
• (MSFS2020 only) Catalina (KTVL) MSFS default scenery
• (MSFS2020 only) KRVL (because of the beacon) MSFS default 40th anniversary edition
• (MSFS2020 only) Saucats scenery (for one building #1961)

Remark: if you have static aircraft sitting below the ground, please check that you have installed the last version Placerville KPVF (>= v1.1.1) and Mariposa KMPI (>= v1.0.1). Delete the old MojaveHigh KAJO airport scenery in case you have it already installed (but keep the Prado Reservoir And Corona improvement to improve the surrounding area).

CREDITS

• A huge thank you to Windhover who share for free his Open Hangar Library. This is why you have some open hangars here in my addon. Thank you!
• Static Cessna 172 (https://skfb.ly/oYXVT) by KOG_THORNS is licensed under Creative Commons Attribution
• Static DA20, DA42, PA28, C180, BA125, C421, Caravan, DA40, Falcon50, Gruman AA1, P2006, PC12, TBM930, LongEZ, Lancair and R44 by helijah are licensed under Creative Commons Attribution
• Static piper_pa18_bs by Lukasz Paraszka is licensed under Creative Commons Attribution