Flightsim.to
    KOSU - The Ohio State University Airport v1.2 - Image 2

    Description

    Featuring over 30+ Custom Buildings. All updated Runway, Taxiway and Ramp textures, designations and signage. Several inside hangar parking spots available for selection!

    🚨ATTENTION SayIntentions users🚨:

    I have published a custom AI Traffic profile for this airport

    1. Open TaxiTuner -> ICAO: KOSU -> Select "KOSU-Custom Airport - by EMBCreations" -> Click "Set my default". This profile is compatible with all 3 downloads.
    About this Scenery:

    35+ Custom Buildings/Objects (Created in Blender) using reference photos featuring:

    -Austin E. Knowlton Aviation Center
    -Basic Piper J-3 Cub (suspending in Knowlton Center)
    -ATC Tower
    -Spartan Hangar
    -ATP Hangar
    -LabCorp Hangar
    -OSU Fire Station
    -Multiple T & Corporate Hangars
    ...and much more

    Feature Highlights:

    -Massive Overhaul of all TWY / RWY / Ramp textures, markings, designations and signage to match real airport
    -9L/27R: Added unique landing markings
    -14/32: Added "Xs" and appropriate textures that reflect its decommissioned status
    -Accurate RWY lighting based of Jeppesen Charts
    -Several selectable inside T & Corporate hangar parking spaces
    -Ground-up rebuild of the newer Knowlton Center Parking Lot
    -3D Glass featured in specific hangars and ATC Tower
    ...and much more!

    Fixes (from default):

    -Added missing 9L/27R numbers
    -Added missing A8 Taxiway & associated Ramp Areas
    -Added missing LabCorp Hangar
    -Added several missing roads and hangar parking lots
    -Removed all signage, markings, designations, etc associated when RWY 14/32 was operational
    -Removed extended runup areas for 9R/27L that no longer exists
    -Removed decommissioned taxiway near Ramp / RWY 5 departure end
    -Removed several patches of photogrammetry tree "spikes" surrounding the airport
    -Removed large tree area to the left of RWY 27L approach (removed in real-life)
    -Removed Rotating Beacon structure from ramp area
    -Moved VASI & PAPIs to proper positions
    -Moved Windsocks to correct locations
    -Repairs to several deformations around runways and taxiways (especially RWY 27L...yikes)

    To Install (VERY important): (3 Options)

    I know having fixed static planes isn't for everyone, so I created 3 options (see below). Only the respected aircraft and its associated chocks are removed. Everything else is present and the same in all 3 files

    • "MAIN FILE": All Static Planes present at airport
    • "Static Planes Hangar ONLY": No Static planes parked on ramp areas, just in hangars
    • "No Static Planes": Removes ALL static planes from the airport
    Some NOTAMs:

    -VERY IMPORTANT: This airport was built and designed with Photogrammetry ON (undesired effects with terrain and texturing may result with it OFF)

    -I cannot guarantee MSFS 2020 backwards compatibility
    -RWY 14/32 can still be selected for a departure RWY (couldn't find a way to remove it)
    -Pilots spawn in static planes: To the best of my knowledge there is no way to remove them
    -The Static planes are from the scenery library and not connected to MSFS AI Traffic

    Most importantly:

    Thank you to everyone in the community that has left kind words, compliments and ratings for my previous airports. I truly hope this airport adds to your enjoyment and immersion for MSFS 2024. 💖

    Feel free to leave a comment and/or rating. Cheers!

    Location

    Hold Ctrl to interact with the map
    View on Google Maps ↗

    Connectez-vous pour participer à la discussion

    Se connecter

    Commentaires(21)

    B
    BLUE3272

    3 months ago

    Beautiful details...perfect for regional flights into Kentucky. Thank you for providing a version without the static aircraft. Much appreciated.
    E
    EMBcreationsAuthor

    3 months ago

    Thank you for the kind rating and compliment, its appreciated! No problem, yeah I even find myself when using 3rd party AI traffic going with the no static planes out on the ramp. 😁 Glad I can provide all 3 options here. Cheers!
    E
    EMBcreationsAuthor

    3 months ago

    Version 1.1 is here! Make sure to delete and replace the file. Thanks for all the support 💖:

    Changelog (applies to all 3 files):
    -Corrected taxiway sign designations near FBO ramp now current to real life
    -Added Windsock to T-Hangar A West's roof that is present at real airport
    -Fixed breaks & dashed marking spacing issues in centerline taxiway lines
    -RWY 27R departure end: Edges added show a distinction between it and RWY 23
    -RWY 23: Darker chevron borders
    -Added 3d rocks to dirt patch near t-hangars
    -Minor changes to dark asphalt border line & color around FBO ramp that matches current pavement
    -Fixed some manholes missing sewer drains
    -Reworked how taxiway centerline markings visually meet at intersections
    D
    Dflight94

    4 months ago

    Don't know if you noticed but on TXY A heading to 27L there are 2 humps between the new T hangars and A8 and one leading into A8.
    U

    4 months ago

    Ce commentaire a été supprimé

    E
    EMBcreationsAuthor

    4 months ago

    Do you happen to have Photogrammetry turned off? In investigating your issue, I was able to replicate those exact bumps in those precise locations when photogrammetry was disabled. If so, this explains a lot as I built and designed this airport with photogrammetry ON. This should flatten those bumps out and make the airport useable for you.👍 If this is the case.

    If you could let me know if that fixes it or not. Thanks again for your report about this.
    Z
    Zadma

    4 months ago

    Experiencing exceptionally harsh stutters of 1-2 seconds in length about every 10-15 seconds when on the ground or in the air (in the vicinity) - not an issue at other very heavy airports so I'm wondering if I have another addon which is conflicting. Has anyone else seen similar with this otherwise fantastic looking scenery?
    E
    EMBcreationsAuthor

    4 months ago

    I'm sorry to hear you are having issues, not sure what could be the cause. Especially if you're not experiencing it at other airports. My PC specs are 9950x3D / 3090 / 64GB RAM and in pre and post release testing I'm not encountering those stutters.

    Have you tried it without static planes? Just curious if the additional rendering of the pilots in them may possibly be causing a higher load for some reason.
    Z
    Zadma

    4 months ago

    I have been running the one without static planes. Gave it another shot a few minutes ago, same plane, same settings, and everything was fine. Chalk it up to the sim having a bit of indigestion I guess!
    E
    EMBcreationsAuthor

    4 months ago

    Yup, typical 2024 randomness😂. Happy to hear you can enjoy the airport now. Cheers 😎👍
    B
    BLUE3272

    4 months ago

    Really good and great.
    E
    EMBcreationsAuthor

    4 months ago

    Thanks for the rating and compliment, its much appreciated. Cheers! 😊
    D
    DROGE

    4 months ago

    What an amazing job! Payware quality in my opinion. I love the 3 options for static aircraft. And appreciate the custom SayIntentions config too. A well deserved 5 stars!
    E
    EMBcreationsAuthor

    4 months ago

    Thank you for leaving such a kind compliment and rating, it really means a lot 😎. No problem, yeah I'm glad the website lets us release 3 versions. Definitely gives so much more flexibility. Cheers 👍
    C
    Cosmic_Ray

    4 months ago

    Any plans for a 2020 ver?
    D
    DROGE

    4 months ago

    Why not upgrade to the current simulator? You can't really expect developers to keep supporting an old version of the sim, that was replaced almost 2 years ago.
    E
    EMBcreationsAuthor

    4 months ago

    Unfortunately, the way scenery development functions in 2020 is surprisingly different in many ways from 2024. In short, it isnt a simple quick "transfer" but would require a lot of weeks, even months of development time. As much as I wish to make my airports compatible to both sims, I have to commit to MSFS 24'.
    m
    mgc76

    4 months ago

    I agree wth GApilot99's comment - your airports are on par (or better than) some payware offerings. Great work! I look forward to whatever US airports, if any, you decide to create in the future.
    E
    EMBcreationsAuthor

    4 months ago

    Thank you for the 5 stars and kind words, I really appreciate it. Kind words like yours and from others really motivate me to keep creating. Cheers! 😎👍
    MSFS 2020MSFS 2024

    KOSU - The Ohio State University Airport v1.2

    Featuring over 30+ Custom Buildings. All updated Runway, Taxiway and Ramp textures, designations and signage. Several inside hangar parking spots available for selection.

    Téléchargements1K
    Version1.2
    Taille du fichier449.2 MB
    PubliéIl y a 3 mois
    Mis à jourIl y a 2 mois
    Classification
    CATÉGORIEGeneral Aviation Airports
    AirportsUnited StatesKOSU5.0 (4)
    EMBcreations
    EMBcreations

    Créateur communautaire

    9 add-ons • 96 abonnés

    Avis des utilisateurs

    5.0

    4 avis

    5
    100%
    4
    0%
    3
    0%
    2
    0%
    1
    0%

    Historique des versions

    Discovered 2 Hangars skipped the optimization step during their development (Excessive draw calls & Node counts) - FIXED.

    Similaires

    KMTP - Montauk Airport - NY (MSFS 2024 edition) V1.4

    KMTP - Montauk Airport - NY (MSFS 2024 edition) V1.4

    A remastered MSFS 2024 version of the MSFS 2020 KMTP airport. Features include everything from the 2020 version plus 3d rocks, new large diversity of plants and trees, 3d weeds in the marshlands, textures etc.  Taking full advantage of all the enhancements MSFS 24' brings.

    par EMBcreations

    4.9
    KMTP - Montauk Airport - NY - MSFS 2020 edition

    KMTP - Montauk Airport - NY - MSFS 2020 edition

    Enhance your Long Island experience with the custom-created Montauk Airport (KMTP). This add-on includes 3D custom buildings and objects, private hangar parking, tiedown and ramp parking spots, as well as reworks and fixes for a more realistic airport environment. Explore this detailed scenery and enjoy a more immersive flight simulation experience.

    par EMBcreations

    4.8
    KHOC - Highland Co. Airport - MSFS 2024 edition V1.4

    KHOC - Highland Co. Airport - MSFS 2024 edition V1.4

    A faithful remaster of my 2020 version for MSFS 2024. Brings in latest graphical enhancements for MSFS 2024. Includes a new 3d cornfield, 3d rocks and vegetation, updated runway textures, fixes to surrounding satellite imagery and much more!

    par EMBcreations

    5.0
    KHWV - Brookhaven Calabro Airport - NY V1.2

    KHWV - Brookhaven Calabro Airport - NY V1.2

    Featuring over 30+ Custom Buildings, fixes TWY signage & Designations, enhanced RWY & TWY ground textures, Static Airplanes, Several Tie-Down & Hangars available to select for parking and much more!

    par EMBcreations

    5.0